Dashcam Support 720p DASH CAM Menu

YOUR ON-BOARD WITNESS

720P DASH CAM (2019 MODEL)

User Guide

IMPORTANT:

Please check local/state laws or municipal code in your area related to proper use and installation of this product.

BUTTONS AND FEATURES

Suction Cup Mounting Port
Speaker
Lens
Mini USB Charging Port (Cable included)
Micro SD Card Slot (Data storage card) Will accept up to a 32GB micro SD Card
RESET
POWER / OK / REC
Turns camera power ON/OFF
START/STOP recording
Starts playback while in Playback Mode
Selects option in MENU Mode
MENU....ENTER/EXIT the MENU Mode
FORWARD...In MENU, press to scroll down
BACK..........In MENU, press to scroll up.
1.8" LCD Screen

MOUNT TO WINDSHIELD

Carefully clean area on windshield with alcohol where you intend to mount dashcam.
Press suction cup FIRMLY onto the windshield.
Engage locking lever (see diagram on Fig. A, Sec. 1) to secure suction cup in place. The suction cup can be moved freely by disengaging and re-engaging the locking lever.
Slide dashcam mounting port onto suction cup mount. Once dashcam is positioned correctly, tighten thumbwheel nut to secure in place.

POWER

Plug 12V power adapter into vehicle's 12V power (cigarette lighter) port.
Plug mini-USB cable end into dashcam's port. The unit will automatically turn on and start recording (when a micro SD card is installed); press OK button to stop recording.
To manually power on the device, PRESS AND HOLD the Power button until the display activates.

NOTE: Some vehicle's 12V ports provide power even after vehicle's ignition is turned OFF. In this case, you will have to manually turn the camera ON/OFF by pressing the POWER button.

VIDEO, PHOTO or PLAYBACK MODE

Select desired mode by pressing MODE button:

NOTE: You must STOP recording BEFORE you can change modes or settings.

VIDEO MODE: Allows you to record video.

PHOTO MODE: Allows you to take images when you press the OK button.

AUDIO MODE: Allows you to record audio clips when you press the OK button.

PLAYBACK: Allows you to playback video files you have recorded with camera.

MENU SCREEN:
While in VIDEO MODE, PHOTO MODE or PLAYBACK MODE, pressing the menu button for 3 seconds will allow you to enter the settings of that mode. Pressing the MENU button for 3 seconds again will allow you to change the setup of the camera.

VIDEO MODE

RESOLUTION:
Change resolution video recordings.

TIME STAMP
Toggle ON/OFF time stamp.

MOTION DETECTION
While powered ON, the camera will sense motion and automatically begin recording. Once motion detection is active, any motion the camera receives will automatically activate the camera to record. To turn off this feature, please remove micro SD card from camera and turn motion detection setting to OFF. Install micro SD card.

VIDEO TIME/LOOP RECORDING
The camera will take short video increments (1, 3, 5 or 10 minutes) and when storage is full, it will delete the oldest recorded file to make room for a new one. You can also disable this feature by changing settings to OFF.

VOICE RECORDING
Turn ON/OFF audio recording while camera is recording video.

SETUP MENU
While in settings mode, PRESS AND HOLD the MENU button for 3 seconds and you will enter the SETUP mode.

FORMAT
This section will allow you to format the micro SD card. NOTE: Doing so will erase all stored footage from the micro SD card.

LANGUAGE
Here you can change the language of the dash camera.

AUTO OFF
Your dash camera will automatically turn on when your vehicle’s ignition has been turned on and automatically turn off when you turn off your vehicle’s ignition.

NOTE: Some vehicle’s 12V cigarette port provides power even when vehicle’s ignition is turned off. In this case, you will have to manually turn on/off your dash camera.

By changing this setting to 1 minute, 3 minute or 5 minute, the camera will turn off automatically if it is not recording or being used. You can disable this by choosing OFF.

SYS RESET
This will allow you to reset your dash camera to its original settings.

DATE INPUT
This setting will allow you to change the dash camera’s date and time. After adjusting the time and date, PRESS AND HOLD the MENU button for 3 seconds to save.

USB
When you connect the dash camera to your PC using supplied sync cable, you are able to transfer your files from the dash camera to your PC.

VERSION
To see different displays firmware version installed on the dash camera.

PHOTO MODE

SIZE
If you want to change the size of the megapixels of the images.

SETUP MENU
While in settings mode, PRESS AND HOLD the MENU button for 3 seconds and you will enter the SETUP mode.

FORMAT
While in the SETTINGS section, you can format the micro SD card. NOTE: Doing so will erase all stored footage from the micro SD card.

LANGUAGE
While in the SETTINGS section, you can change the language of the dash camera.

AUTO OFF
Your dash camera will automatically turn on when your vehicle’s ignition has been turned on and automatically turn off when you turn off your vehicle's ignition.

NOTE: Some vehicle’s 12V cigarette port provides power even when vehicle's ignition is turned off. In this case, you will have to manually turn on/off your dash camera.

By changing this setting to 1 minute, 3 minute or 5 minute, the camera will turn off automatically if it is not recording or being used. You can disable this by choosing OFF.

SYS RESET
This will allow you to reset your dash camera to its original settings.

DATE INPUT
This setting will allow you to change the dash camera’s date and time. After adjusting the date and time, PRESS AND HOLD the MENU button for 3 seconds to save.

USB
When you connect the dash camera to your PC using supplied sync cable, you are able to transfer your files from the dash camera to your PC.

VERSION
Displays firmware version installed on the dash camera.

AUDIO MODE

Press the OK button to begin audio recording. Press again to stop audio recording.

There are no settings to change while on AUDIO mode. Entering settings while on AUDIO mode will give you access to VIDEO settings.

PLAYBACK MODE

DELETE
Delete a file.

LOCK / UNLOCK
User can lock a file so the loop recording feature will not delete it while recording. A locked file must be manually unlocked before it will be deleted automatically once storage is full.

THUMBNAILS
See thumbnails of your recorded videos.

VOLUME
Raise or lower the volume level during playback.

SETUP MENU
While in settings mode, PRESS AND HOLD the MENU button for 3 seconds and you will enter the SETUP mode.

FORMAT
While in the SETTINGS section, you can format the micro SD card.
NOTE: Doing so will erase all stored footage from the micro SD card.

LANGUAGE
While in the SETTINGS section, you can change the language of the dash camera.

AUTO OFF
Your dash camera will automatically turn on when your vehicle's ignition has been turned on and automatically turn off when you turn off your vehicle's ignition.

NOTE: Some vehicle’s 12V cigarette port provides power even when vehicle's ignition is turned off. In this case, you will have to manually turn on/off your dash camera.

By changing this setting to 1 minute, 3 minute or 5 minute, the camera will turn off automatically if it is not recording or being used. You can disable this by choosing OFF.

SYS RESET
This will allow you to reset your dash camera to its original settings.

DATE INPUT
This setting will allow you to change the dash camera’s date and time. After adjusting the date and time, PRESS AND HOLD the MENU button for 3 seconds to save.

USB
When you connect the dash camera to your PC using supplied sync cable, you are able to transfer your files from the dash camera to your PC.

VERSION
Displays firmware version installed on the dash camera.

GLOSSARY OF CAMERA ICONS

Battery Icons

No micro SD Card in Camera

Playback Mode

Photo Mode

Video Recording Mode

Recording- When Blinking

Audio Mode

Disposal of your Dash Camera

All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities. Contact local authorities to learn about disposal and recycling options available in your area.
The correct disposal of your dashcam will help prevent potential negative consequences for the environment and human health.
For more detailed information about disposal of your dashcam, please contact your city office, waste disposal service or the shop where you purchased the product.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Please note that changes or modifications of this product is not expressly approved by the party responsible for compliance and could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class 8 digital device, pursuant to Part 15 of the FCC Rules. These limitations are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. If interference is occurring, determine if it's coming from this device by turning it off to see if the interference stops. If this device is causing interference, the user is encouraged to try to correct the situation by trying the following measures:

Reorient or relocate the receiving antenna.
ncrease the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

VISIT OUR MOBILE-FRIENDLY
DASHCAMSUPPORT.COM
FOR VIDEO TUTORIALS AND SUPPORT.